Center screen projector won't display graphics

If the center screen projector does not find the source while the side screen projectors are displaying content, indicated by a light blue display while cycling through a list of inputs, do the following:

• Go into the electrical panel closet, which is right outside the entrance to the HUB from Lobby B. The light switch is on the outside to the right of the door.

• Go to the second electrical panel from the left. To open, press the bottom of the latch, not the top. These are deceiving.

• To ensure you are looking at the correct electrical panel, look at the list on the back of the door and make sure breaker 29 is for the center stage projector.

• Flip breaker 29 off and on.

• Go back to the sound booth and turn on the center projector using the remote control near the graphics computer using the green button on the top.

• Give the projector about 60 seconds to boot up and then find the graphics computer.

• If this fails, repeat until it works.